ONE OF A KIND—COMBINED UF AND SWRO SYSTEM
For variable feedwater, SeaUltra features UMT’s pressurized UF with high-rejection, low- energy membranes for high-quality water and long life. This is the only UF-SWRO system available today with UF membrane manufacturing, SWRO membrane manufacturing, and system integration all by the same company. SeaUltra units produce water at 1,000–2,500 m3/day and can be combined into blocks of four units under the same control system for flows of 1,000–10,000 m3/day.
SIMPLIFY WITH ONE TANK, ONE CONTROL SYSTEM, AND ONE COMPANY
- A single multifunctional tank combining the UF CIP tank, RO CIP tank, and UF backwash
- A single control system for the
entire UF-SWRO machine.
- A single company, manufacturing both UF membranes, SWRO membranes, all equipment and integrating the
BUILDING BLOCKS FOR A SYSTEM SPECIFIC TO YOU
- Scalable, modular units allow blocks of up to four of the same capacity to be combined and integrated into the same control
ACHIEVE HIGHER WATER PRODUCTION WITH A SMALLER FOOTPRINT
- SeaPAK-1000 integrates both UF pressure vessels and SWRO pressure vessels in a single skid, maximizing footprint
| SeaUltra-1000 | SeaUltra-2500 | ||
| Flow Rates | Permeate rate (m3/d) | 1,000 | 2,500 |
| Concentrate rate (m3/d) | 1,857 | 4,643 | |
| Feed Rate (m3/d) | 2,857 | 7,14 3 | |
| Performance Data | Membrane quantity | UF: 48, RO:72 | UF: 120, RO: 182 |
| Recovery | 35% | ||
| Nominal rejection | 97–99% | ||
| TDS (NaCl mg/L) | 35,000–45,000 | ||
| Design temperature (°C) | 15 | ||
| Operating range (°C) | 15–29 | ||
| Operating pH | 7.7 | ||
| Minimal inlet pressure (psi) | 14.5–65.3 | 14.5–66.7 | |
| Operating pressure (psi) | 950 | ||
| Energy recovery | Turbocharger | ||
| Specific power Consumption(kWh/m3) | 3.95 | ||